 |
|
|
Toode:
|
iTC-5 Instrument Transducer Converter |
Raymarine iTC-5 Instrument Transducer Converter
Transducer signals are easily converted to SeaTalkng
The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng.
 |
|
Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.
Extended STng systems can support multiple iTC-5 units.
SeaTalkng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkng backbone.
Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).
If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers
|
|
Item
|
Description |
|
1
|
Red - Speed and sea temperature transducer connection |
|
2
|
Orange - Wind transducer and rotavecta connection |
|
3
|
Yellow - Fluxgate compass connection |
|
4
|
Green - Rudder reference transducer connection |
|
5
|
Blue - Depth transducer connection |
|
6
|
SeaTalkng backbone connection |
|
7
|
SeaTalkng spur connection |
|
8
|
Sea Talkng backbone connection |
Possible systems
Note: In a SPX autopilot system the fluxgate compass and rudder reference transducer must be connected directly to the course computer and not the iTC-5.
|
Basic SeaTalkng System with iTC-5
- ST70 Instrument display
- 2 x i70 Instrument displays
- Terminated SeaTalkng T-piece connector
- Terminated iTC-5
- Rudder reference transducer
- Depth transducer
- Fluxgate compass (not available anymore)
- Raymarine wind transducer or rotavecta
- Speed and sea temperature transducer
|
|
 |
Extended SeaTalkng System with iTC-5
- ST70 Instrument display
- p70r Pilot Controller
- i70 Instrument display
- AIS tranceiver
- SPX course computer (supplying 12 V power to SeaTalkng network)
- Man Over Board (MOB)
- SeaTalkng 5-way connector
- Rudder reference transducer (connected via SPX)
- Fluxgate compass (connected via SPX)
- Multifunction display with built in GPS
- SeaTalk to SeaTalkng converter
- iTC-5
- Terminated iTC-5
- Trim tabs
- Engine data (connected via devicenet adaptor)
- Terminated SeaTalkng 5-way connector
- Depth transducer
- Speed and sea temperature transducer
- Raymarine wind transducer or rotavecta
Lae alla Seatalk NG juhend.
|
Kood
|
E70010
|
| Tarneaeg: |
Tarne 10 tööpäeva jooksul. |
Garantii:
|
Ülemaailmne 24 kuud tootja garantii, toote registreerimise korral Raymarine kodulehel on garantii 36 kuud. |
Tagastamine:
|
Avamata ja kasutamata kaupa on võimalik mõjuval põhjusel 14 päeva jooksul tagastada. |
Hind EUR
|
372.00
|
Soodushind
|
361.00
|
|
Tagasi
|
|
Kehtiv valuuta on EUR ja kaupade hinnad sisaldavad Eesti käibemaksu 20%. Tasuda saab pangaülekandega, krediitkaardiga
(Visa, MasterCard), Eesti pangalinkidega (Swedbank, SEB, LHV Pank, Nordea, Danskebank, Krediidipank) ja SVEA järelmaksuga.
|
;)
